QIDI Tech X-Smart 3 3D Printer, Auto Levelling, 500mm/s Printing Speed, Flexiable HF Board, Filament Detection, Resonance Compensation, 175*180*170mm

Highlights

QIDI Tech X-Smart 3  Main Features 

QIDI Tech X-Smart 3 3D printer, Klipper-based, delivers a high-speed printing of up to 500mm/s, in addition to the 20000mm/s² printing acceleration and 30mm³/s extruder flow. The high-speed extruder, and CoreXY structure all make it the leading desktop high-speed FDM printer.

• Print speed up to 500 mm/s
• CoreXY structure
• Resonance compensation function
• Automatic bed leveling
• Faster Speed 500mm/s
• Acceleration 20000mm/s²
• Flow 30mm³/s
• Print Size 175*180*170mm
•  

QIDI Tech X-Smart 3 3D Printer 3D printer comes with:

• Spool of filament
• All the necessary tools
• All the necessary cables
• Spare parts kit

64-Bit Processor

For a higher printing speed and better effect, QIDI X-Smart 3 adopts Cortex-A53 64-bit processor, which has a 1.5Ghz frequency, 8G-EMMC, and 1G DDR3.

Automatic Levelling

New automatic intelligent leveling of 16 points is taken to calculate the printing compensation.

Flexible HF Board

The double-sided flexible magnetic HF plate has excellent adhesion, no warping trouble, and is easy to remove the prints.

High-Speed Extruder

The extruder with a 9.5:1 transmission ratio is steadier, stronger, and faster. Most materials are supported, such as ABS, ASA, PETG, TPU, etc.

CoreXY Structure

With TMC2209 silent drive and CoreXY structure, this 3D printer can reduce motion Inertia and improve the motion speed, offering a low-noise printing experience.

Excellent User Experience

The highly acclaimed QIDI slicer software has both normal mode and expert mode, which is also easy for beginners to get started. It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.

QIDI Tech X-SMART - The Leading Desktop High-Speed FDM 3D Printer 

The QIDI Tech X-SMART 3 is a compact desktop FDM 3D printer packed with a great number of smart features and capable of extremely fast print speeds at 500 mm/s max. Being the most affordable of the three models from the QID's latest lineup, the X-SMART 3 shares many key features with the more advanced X-MAX 3 and X-PLUS 3, providing users with the professional print quality and ease of use at a great price-performance ratio. The machine comes fully assembled and ready to use out of the box. The enclosed build chamber and removable transparent top cover combined contribute to the most suitable printing environment for various filaments.

The QIDI Tech X-SMART 3 also sports a CoreXY structure that is capable of reducing inertia and achieving print speeds of up to 500 mm/s. A fast speed like this always leads to increased vibrations and, consequently, quality loss, but the X-SMART 3 uses a resonance compensation function to avoid it and thus retain decent print quality. The same carbon rods on the X-axis, as used on the X-MAX 3 and X-PLUS 3, alongside a new lightweight extruder, significantly reduce the weight of the printhead and the X-axis, which also allows for smoother movements.

Klipper Based 

The X-SMART 3 runs on Klipper firmware and is powered by a 64-bit Cortex A53 processor at 1.5 GHz frequency, 8 GB eMMC, and 1 GB DDR3. The 3D printer features auto bed leveling realized with a sensor that calibrates the bed in 16 points. To save time and material, the X-SMART 3 offers a print recovery function, which allows resuming printing after a power outage.

Maximized Print Quality

The max nozzle temperature of 280 °C and a heated print bed delivers a hassle-free printing experience with most consumer thermoplastics. Equipping a direct drive extruder with a 9.5:1 gear ratio and a max flow rate of 30 mm³/s, the QIDI Tech X-SMART 3 guarantees consistent high-quality prints even at high speeds. The magnetic double-sided build plate can be bent for easy part removal. The printer comes with a 0.4 mm brass nozzle.

Compatible with PLA, ABS, ASA, PETG, TPU, etc. Materials

The X-SMART 3 is compatible with the most common filaments like PLA, ABS, ASA, PETG, TPU, and others. As an open-material system, it accommodates thermoplastics from any manufacturer. Full enclosure prevents temperature fluctuations and makes printing with ABS-type materials more reliable.

QIDI Slicer Software 

The 4.3" color LCD touchscreen of the X-SMART 3 sports an intuitive user interface that allows for hassle-free user operations. The machine supports a Wi-Fi connection and is equipped with a USB slot.

Based on the renowned Cura slicer, the QIDI Print software offers normal and expert modes to maximize flexibility both for beginners and experienced users. It runs on Windows, macOS, and Linux. The printer is also compatible with Cura, Simplify3D, or PrusaSlicer.

180 x 180 x 170 mm Build volume

The build volume of 180 x 180 x 170 mm by QIDI Tech X-Smart 3 is suitable for printing small to medium parts and is enough for most consumer projects. To make the printing process more convenient, the enclosure features integrated LED lights.

Specification