DIMIFUN DM6 B12 12W Laser Engraving Machine, Eye Protection, 0.01mm Accuracy, 0.06mm Spot, 12000mm/min Speed, 330*330mm

Highlights

Advanced Laser Technology

B12 adopts a 2-beam laser diode engraving and cutting module, with fixed focus and dual fan design. Due to the built-in DIMIFUN unique fiber compression technology, it has very strong energy density (0.06x0.06mm, 12W+ pulse and 11W continuous light power), and has very special and top-level artistic expression in the engraving of materials such as stainless steel grayscale engraving, stone carving, glass engraving, hardwood relief, canvas art, etc., with super strong cutting penetration and precision, it can cut pine wood with a thickness of up to 20 mm, acrylic with a thickness of 15 mm, etc.

Fast Focus Design

Combine fixed focus lens and Z-axis knob to adjust the height. Just turn the knob to focus. Equipped with a fixed focus block, it is very convenient to use.

32-bit Motherboard

The motherboard adopts a 32-bit dual-core MCU, which has a faster processing speed and can reach an engraving speed of 12000mm/min. The laser can be engraved online and the TF card offline. Working area: 330x330mm.

Easy Assembly Structure

The aluminum profile structure design and dual-axis motor make the machine work more stable and improve engraving accuracy. 60% pre-assembled, 15-20 minutes to complete assembly.

Square Measuring Ruler

The X-axis and Y-axis contain precise scale lines, which are convenient for you to quickly measure the size of the engraved object

Safety Design

The laser filter can filter 98% of the ultraviolet rays entering the eyes. The mainboard has an emergency switch and a gyroscope sensor. When you press the emergency switch or the machine tilts more than 15 degrees, an alarm will be triggered and the machine will stop running.

Software Compatibility

DM6 laser engraving machine is compatible with most engraving software. For example, free software: LaserGRBL (for Windows), paid software: Lightburn (for Windows, Mac), mobile application: MKSLaser (for Android and IOS systems)

Engraving and Cutting Capabilities

B12 laser can engrave wood, plastic, paper, leather, bamboo, sponge paper, alumina, stainless steel, chevron board, acrylic, etc.

Air Assist

The B12 laser module has an air assist design and a built-in metal air nozzle. If you need to use air assist, you need to purchase an air pump separately. The recommended flow rate is greater than 30L/min.

DM6 B12 Laser engraving machine

• 12W optical power
• 0.06*0.06mm Spot
• 0.01mm Motion Accuracy
• Support offline control
• Multiple safety protections
• Full metal body
• Eye protection
• Easy to assemble
• 12000mm/min Engraving speed
• 330*330mm Working Area

Air Assist Function

The air pump can improve cutting ability and avoid edge burn, help remove debris and smoke, protect the laser lens, and bring better engraving results.

Smaller spot

Higher precision

The improved lens array compresses the focal spot to only 0.06mm. It is very suitable for high-precision engraving, and it will bring more details to your engraving.

Quick assembly 60% of the components are modular, easy to assemble, and suitable for beginners and professionals.

Specification